News
About us
EN
EN DE

Foam agents for modern firefighting

For more than 100 years, we have been developing and producing top-class foam agents and special extinguishing agents for all fire classes, of outstanding quality for all requirements and areas of modern firefighting. 

 Focus on environmental compatibility and sustainability in all fire classes
The responsible handling of the environment and its scarce resources poses high demands on modern fire protection. The development of environmentally friendly and efficient extinguishing agents based on renewable raw materials has been our focus since the early 1960s. With us, you receive not only a qualitatively outstanding foam agent with large reserves but also our expertise, support, accessibility, and commitment.


Flourine-free 
We define products as fluorine-free if they are manufactured without the intentional addition of fluorine-organic compounds for the purpose of increasing performance in such a way that, according to current and commercially available analysis, they do not contain any fluorine-organic substances above the regionally ubiquitous background levels (e.g. in the drinking water used for production). Please read our
TI-021 - Does fluorine-free mean free of fluorine?
TI-021 – Does fluorine free mean no Fluorine?

Class A foam agents are designed for extinguishing solid fuel (class A) fires, such as wood, paper, textiles, coal, hay, cotton, some types of plastics, tyres.

The use of Class B foam agents can quickly and reliably extinguish fires involving liquid and liquefiable substances. Fuels of Class B must be differentiated into non-polar (not miscible with water) liquids (e.g., gasoline, diesel, kerosene, oil, etc.) and polar (miscible with water) liquids (methanol, ethanol, isopropanol, etc.). The polarity of the fuels is crucial for the selection of applicable foam agents.

Class F foam agents are used to extinguish burning food grade oil and fat in private and commercial kitchens easily and safely.


Our foam agents for your scope

Filter / Sort
By fire class
By type of foam
  • Low expansion foam
By scope
All products
Fluorine-free icao b

vaPUREx®LV ICAO B 3% F-15 #7345

Low-viscosity 3 % fluorine-free fire extinguishing foam agent for efficient and effective fighting of large-scale aviation fuel fires (kerosene, Jet A, etc.).

  • Aviation
find out more
Fluorine-free Multi purpose Forest fires

STHAMEX® Performance 1% F-20 #9148

Fluorine-free multi-purpose fire extinguishing foam agent for use as low, medium and high expansion foam with a 1% proportioning rate.

  • Waste & recycling
  • Fire department
  • Industries
  • Aviation
  • Mining
  • Forest fires
find out more
Alcohol resistant Fluorine-free

vaPUREx®- AR 3/3 F-5 #8342

vaPUREx® AR 3/3 is a fluorine-free alcohol resistant class B fire extinguishing foam agent for low-, medium- and high-expansion foam applications. Its special combination of polymers supports the formation of a resilient foam lamella. The generated foam displays an exceptional burnback resistance.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Marine industry
find out more
Fluorine-free

vaPUREx®LV ICAO C 3% F-5 #7371

Low-viscosity, newtonian fire extinguishing foam agent that achieves the highest performance level "ICAO Level C" without any additions of fluorine.

  • Aviation
find out more
Fluorine-free Multi purpose Forest fires

STHAMEX® 3% F-15 #9352

Fluorine-free multi-purpose fire extinguishing foam agent for use as low, medium and high expansion foam.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Forest fires
find out more
Fluorine-free vds

vaPUREx® FXS AR 3/3 F-0 #2365

Fluorine-free, alcohol-resistant fire extinguishing foam agent for use as a 3% low expansion foam in fixed systems.

  • Fire extinguishing systems
find out more
1x3 Alcohol resistant Fluorine-free

vaPUREx®- AR 1x3 F-5 #8441

vaPUREx® AR 1/3 F-5 #8441 is a highly effective, universal firefighting foam agent for use in critical risk areas where chemicals, polar, or non-polar hydrocarbons are produced, processed, decanted, transported or stored.

  • Waste & recycling
  • Industries
find out more
Fluorine-free Multi purpose Forest fires

STHAMEX® Performance 1% F-10 #9147

Fluorine-free multi-purpose fire extinguishing foam agent for use as low, medium and high expansion foam with a 1% proportioning rate.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Forest fires
find out more
Fluorine-free icao b

vaPUREx®LV ICAO B 1% F-5 #7142

Low-viscosity 1 % fluorine-free fire extinguishing foam agent for efficient and effective fighting of large-scale aviation fuel fires (kerosene, Jet A, etc.).

  • Aviation
find out more
Fluorine-free icao b

vaPUREx®LV ICAO B 3% F-10 #7341

Low-viscosity 3 % fluorine-free fire extinguishing foam agent for efficient and effective fighting of large-scale aviation fuel fires (kerosene, Jet A, etc.).

  • Aviation
find out more
Fluorine-free training

TRAINING FOAM-N 3% F-0 #9346

Fluorine-free, 3 % training foam extinguishing agent for training and practice purposes of municipal fire services.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Training foam
find out more
Fluorine-free training

EXERCISE FOAM-N 1% F-0 #9141

Fluorine-free, 1 % training foam extinguishing agent for training and practice purposes of municipal fire services.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Training foam
find out more
Alcohol resistant Fluorine-free

vaPUREx®- AR 3/3 F-5 #8343

vaPUREx® AR 3/3 F-5 #8343 is a highly effective, universal firefighting foam agent for use in critical risk areas where chemicals, polar, or non-polar hydrocarbons are produced, processed, decanted, transported or stored.

  • Waste & recycling
  • Industries
  • Mining
  • Marine industry
find out more
Fluorine-free Multi purpose

STHAMEX® 6% F-15 #9601

Fluorine-free multi-purpose fire extinguishing foam agent for use as low, medium and high expansion foam.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Forest fires
find out more
Fluorine-free

STHAMEX®-class A Classic 1% F-15 #9144

Fluorine-free class A fire extinguishing foam agent with concentration of 1% for use as low and medium-expansion foam.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Forest fires
find out more
Fluorine-free Inside Air Marine industry

STHAMEX® -IAF MARINE 2% F-10 #9275

Fluorine-free, synthetic fire extinguishing foam agent for generating high-expansion foam inside fire fumes. Specially developed for use in shipping.

  • Marine industry
find out more
Fluorine-free

MOUSSEAL®-A F-10 #2047

Fluorine-free additive that provides increased A-ratings of fire extinguishers.

  • Fire extinguishers
find out more
Fluorine-free

MOUSSOL®- FF FXS 3/6 F-5 #2941

Fluorine-free, pseudoplastic, yet very easily dosable foam agent for use on polar and non-polar flammable liquids.

  • Fire extinguishing systems
find out more
Fluorine-free vds

vaPUREx® FXS 3% F-0 #2357

vaPUREx® FXS 3 % is a suitable alternative to fluorinated foams in fixed systems that cover non-polar as well as selected polar fire risks. Its strong fire performance allows service in foam fire extinguishing systems using foam branch pipes and foam monitors as well. Dosing is possible with many commercially available proportioning systems.

  • Fire extinguishing systems
find out more
Fluorine-free

vaPUREx® LV 0.5% F-10 #7041

Fluorine-free Class B foam concentrate for direct foam application on large non-polar (water immiscible) Class B fires.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
find out more
Fluorine-free

STHAMEX® class A 0.5% F-15 #9071

Fluorine-free class A fire extinguishing foam agent with concentration of 0.5% for use as low and medium-expansion foam.

  • Waste & recycling
  • Fire department
  • Industries
  • Mining
  • Forest fires
find out more

Fire classes

Here is a brief introduction to the different fire classes.
are designed for extinguishing solid material (class A) fires such as wood, paper, textiles, coal, hay, cotton, some types of plastics, tyres.
The use of Class B foam agents can quickly and reliably extinguish fires involving liquid and liquefiable substances. Fuels of Class B must be differentiated into non-polar (not miscible with water) liquids (e.g., gasoline, diesel, kerosene, oil, etc.) and polar (miscible with water) liquids (methanol, ethanol, isopropanol, etc.). The polarity of the fuels is crucial for the selection of applicable foam agents.
are used to extinguish burning edible oils and fats in private and commercial kitchens easy and safe.

Foam types

Here is a brief introduction to our different foam types.
The Compressed Air Foam System, or CAFS, is a technology used to generate compressed air foam. Unlike traditional methods, where the foam concentrate is mixed into the water stream and then aerated using a nozzle and ambient air, CAFS mixes all three components (air, water, and foam concentrate) in a mixing chamber. This approach differentiates CAFS from conventional foam generation techniques, such as the free intake of air typical for heavy foam nozzles or air blending with fans as seen in light foam generators. In CAFS technology, the mixture of all three media (air, water, and foam concentrate) occurs in a mixing chamber. The independent control of all three media streams allows for highly flexible manipulation of the foam properties. Foam can be made wet, soft, and flowing, or dry, stiff, and highly adhesive.
 
One significant advantage of CAFS, in addition to the flexible control of foam properties, is its extended reach and water savings of up to 80% compared to conventional water-based firefighting methods. This enables quick extinguishment of fires even with limited water resources, significantly reducing water damage. The overall lighter weight (approximately 25% less than water) further enhances the mobility of the attack team.
   
CAFS is particularly valued for its versatile application possibilities in mobile municipal firefighting, for both exterior and interior attacks in building fires, as well as in forest and wildland fires. Firefighting is carried out using wet compressed air foam as needed, while dry compressed air foam is used for property protection and covering already extinguished areas. In the industrial sector, the long reach of CAFS allows for safe firefighting from a distance. Additionally, compressed air foam can be used to flood conveyor and ventilation shafts. Thanks to the propulsion provided by compressed air and its lighter weight, it can be transported much higher than conventional foam.
Wetting agents are additives mixed with water in very small amounts (<0.5%) that significantly enhance the extinguishing effect of the water. Wetting water has a greatly reduced surface tension, which decreases the interfacial tension between water and solid materials. This breaks the droplet form of the water, creating a thin, spreading film of water on the surface of the burning material.
Inside Air Foam (IAF) is generated with special foam concentrates and light foam generators in enclosed spaces, such as warehouses or engine rooms. IAF systems use the hot, combustion-product-laden gases from the fire event for foaming. This immediately binds the smoke gases and cools the surrounding atmosphere. This firefighting method does not require an external air supply or exhaust openings, making the structural requirements for IAF systems potentially more cost-effective compared to conventional light foam systems.
   
This method places specific demands on the extinguishing agent, as heat, smoke particles, acidic combustion gases, and other pyrolysis products are highly destructive to foam. Therefore, only special IAF foam extinguishing agents can be used for this process; conventional foam agents are not suitable. The suitability of foam extinguishing agents must be proven for each project with the respective fuels through a hot test. Special medium-expansion foam generators, developed for industrial fire protection, operate with approximately 25- to 35-fold expansion in the lower medium-expansion foam range and can achieve throw distances of up to around 35 meters.
High-expansion foam has an enormous foam volume yet is very light. It contains a very high air content, resulting in coarse bubbles and a particularly "dry" appearance. Due to its large volume and low weight, high-expansion foam cannot be "thrown." Its extinguishing effect is primarily based on its separation, insulation, and displacement effects. These extinguishing effects are further enhanced by the relatively high foam destruction rate (bursting of the foam bubbles). This releases tiny water droplets, which immediately evaporate due to the high combustion temperatures, forming 1,700 times their volume of water vapor. The surrounding air is cooled accordingly. High-expansion foam is produced using high-expansion foam generators.
   
High expansion foam works by displacing air or oxygen. Due to its low volumetric weight, light foam should only be used in enclosed spaces, as it would otherwise be carried away by thermal currents or other air movements.
   
Due to the very high expansion ratio of up to 1000 liters of foam from one liter of foam concentrate solution, even the largest spaces, such as airplane hangars or warehouses, can be completely flooded with light foam in a short time. The water content in the foam is so low that water damage is practically eliminated. When used preventively, light foam displaces flammable gases and provides effective protection against flames and heat exposure.
Depending on the expansion ratio, "wet" fine-bubbled foam or "dry" coarse-bubbled foam with low weight and high volume is produced. The extinguishing effect is primarily based on separation, cooling, and displacement effects. Medium-expansion foam is generated using medium-expansion or combination nozzles. In the nozzle, the foam concentrate solution mixes with the induced air, impacts a screen mesh installed in the nozzle under pressure, and is further foamed. This process quickly produces a large amount of foam, which can be built up to a considerable height.
   
Medium-expansion foam is particularly versatile due to its wide range of expansion ratios. With 50- to 100-fold expansion, it is effective against plastic, smoldering, and liquid fires. With 80- to 200-fold expansion, it is suitable for flooding shallow spaces such as channels, pits, and shafts, and anywhere rapid buildup of large quantities of foam is essential for extinguishing success. Medium-expansion foam can achieve throw distances of up to approximately 12 meters. It spreads, meaning it slowly covers the surface of burning materials within certain limits, forming a stable, closed, and gas-impermeable foam blanket.
Low expansion foam is a "wet," fine-bubbled foam with high weight and relatively low volume. It is highly flowable, burn-resistant, gas-tight, and particularly effective at preventing re-ignition. Heavy foam adheres well to vertical surfaces and quickly seals liquid surfaces in a gas-tight manner. Its extinguishing effect is primarily based on separation and cooling. In the case of F3 foam extinguishing agents, the separation effect is further enhanced by a polymer film.
   
Low expansion foam is generated in stationary installed systems or mobile through nozzles or foam monitors. Any installed screens or downstream enhancement sections, such as pourers, ensure that the foam concentrate solution is even better aerated with the induced air, resulting in a "stiffer," fine-bubbled foam.
   
Due to its excellent flowability, low expansion foam can be used to extinguish both liquid and solid fires. The foam spreads over the entire fire surface in a very short time, sealing it gas-tight.
   
For solid fires, its good adhesion to three-dimensional objects is particularly advantageous. Special foaming methods, such as CAFS, enhance this effect. When used preventively, low expansion foam suppresses the emission of flammable gases. The fire surfaces remain covered with a gas-tight, insulating, and cooling foam layer for an extended period. Due to its relatively high weight, low expansion foam can achieve large throw distances, allowing for firefighting from a safe distance.

Our foam agents for all industries

Product Product No. Proportioning Rate Type of foam Frost-resistance
BosQRet® #1801 1801 Retardant
vaPUREx®LV ICAO B 3% F-15 #7345 7345 3% medium expansion, wetting agent, low expansion -10°C
STHAMEX® Performance 1% F-20 #9148 9148 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -20°C
vaPUREx®- AR 3/3 F-5 #8342 8342 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
vaPUREx®LV ICAO C 3% F-5 #7371 7371 3% CAFS, network water, low expansion foam -5°C
STHAMEX® 3% F-15 #9352 9352 3% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
vaPUREx® FXS AR 3/3 F-0 #2365 2365 3%/3% Low expansion foam 0°C
vaPUREx®- AR 1x3 F-5 #8441 8441 1%/3% CAFS, medium expansion, wetting agent, low expansion -5°C
STHAMEX® Performance 1% F-10 #9147 9147 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -10°C
vaPUREx® FXS PLY 1% F-0 #2150 2150 1% 0°C
vaPUREx®LV ICAO B 1% F-5 #7142 7142 1% CAFS, network water, low expansion foam -5°C
STHAMEX® - MARINE 3% F-20 #9372 9372 3% CAFS, lightweight foam -20°C
vaPUREx®LV ICAO B 3% F-10 #7341 7341 3% CAFS, medium expansion, wetting agent, low expansion -10°C
STHAMEX® - IAF MARINE 2% F-10 #9271 9271 2% CAFS, lightweight foam -10°C
STHAMEX® FXS IAF 3% F-10 #2355 2355 3% High expansion foam -10°C
STHAMEX® FXS IAF 2% F-10 #2241 2241 2% High expansion foam -10°C
TRAINING FOAM-N 3% F-0 #9346 9346 3% medium expansion, wetting agent, low expansion 0°C
EXERCISE FOAM-N 1% F-0 #9141 9141 1% medium expansion, wetting agent, low expansion 0°C
vaPUREx®- AR 3/3 F-5 #8343 8343 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 6% F-15 #9601 9601 6% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX®-class A Classic 1% F-15 #9144 9144 1% CAFS, medium expansion, wetting agent, low expansion -15°C
STHAMEX® -IAF MARINE 1% F-10 #9146 9146 1% CAFS, lightweight foam -10°C
STHAMEX® -IAF MARINE 2% F-10 #9275 9275 2% CAFS, high expansion foam, low expansion foam -10°C
MOUSSEAL®-MR F-30 #2053 2053 ready-to-use solution -30°C
FETTEX® F-25 #2052 2052 ready-to-use solution -25°C
MOUSSEAL®-A F-10 #2047 2047 ready-to-use solution wetting agent, low expansion -10°C
MOUSSOL®- FF FXS 3/6 F-5 #2941 2941 3%/6% Low expansion foam -5°C
vaPUREx® FXS 3% F-0 #2357 2357 3% Low expansion foam 0°C
vaPUREx® LV 0.5% F-10 #7041 7041 0.5% CAFS, medium expansion, wetting agent, low expansion -10°C
STHAMEX® class A 0.5% F-15 #9071 9071 0.5% CAFS, medium expansion, wetting agent, low expansion -15°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
STHAMEX® Performance 1% F-20 #9148 9148 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -20°C
vaPUREx®- AR 3/3 F-5 #8342 8342 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 3% F-15 #9352 9352 3% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
vaPUREx®- AR 1x3 F-5 #8441 8441 1%/3% CAFS, medium expansion, wetting agent, low expansion -5°C
STHAMEX® Performance 1% F-10 #9147 9147 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -10°C
TRAINING FOAM-N 3% F-0 #9346 9346 3% medium expansion, wetting agent, low expansion 0°C
EXERCISE FOAM-N 1% F-0 #9141 9141 1% medium expansion, wetting agent, low expansion 0°C
vaPUREx®- AR 3/3 F-5 #8343 8343 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 6% F-15 #9601 9601 6% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX®-class A Classic 1% F-15 #9144 9144 1% CAFS, medium expansion, wetting agent, low expansion -15°C
vaPUREx® LV 0.5% F-10 #7041 7041 0.5% CAFS, medium expansion, wetting agent, low expansion -10°C
STHAMEX® class A 0.5% F-15 #9071 9071 0.5% CAFS, medium expansion, wetting agent, low expansion -15°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
STHAMEX® Performance 1% F-20 #9148 9148 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -20°C
vaPUREx®- AR 3/3 F-5 #8342 8342 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 3% F-15 #9352 9352 3% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX® Performance 1% F-10 #9147 9147 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -10°C
TRAINING FOAM-N 3% F-0 #9346 9346 3% medium expansion, wetting agent, low expansion 0°C
EXERCISE FOAM-N 1% F-0 #9141 9141 1% medium expansion, wetting agent, low expansion 0°C
STHAMEX® 6% F-15 #9601 9601 6% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX®-class A Classic 1% F-15 #9144 9144 1% CAFS, medium expansion, wetting agent, low expansion -15°C
vaPUREx® LV 0.5% F-10 #7041 7041 0.5% CAFS, medium expansion, wetting agent, low expansion -10°C
STHAMEX® class A 0.5% F-15 #9071 9071 0.5% CAFS, medium expansion, wetting agent, low expansion -15°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
STHAMEX® Performance 1% F-20 #9148 9148 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -20°C
vaPUREx®- AR 3/3 F-5 #8342 8342 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 3% F-15 #9352 9352 3% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
vaPUREx®- AR 1x3 F-5 #8441 8441 1%/3% CAFS, medium expansion, wetting agent, low expansion -5°C
STHAMEX® Performance 1% F-10 #9147 9147 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -10°C
TRAINING FOAM-N 3% F-0 #9346 9346 3% medium expansion, wetting agent, low expansion 0°C
EXERCISE FOAM-N 1% F-0 #9141 9141 1% medium expansion, wetting agent, low expansion 0°C
vaPUREx®- AR 3/3 F-5 #8343 8343 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 6% F-15 #9601 9601 6% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX®-class A Classic 1% F-15 #9144 9144 1% CAFS, medium expansion, wetting agent, low expansion -15°C
vaPUREx® LV 0.5% F-10 #7041 7041 0.5% CAFS, medium expansion, wetting agent, low expansion -10°C
STHAMEX® class A 0.5% F-15 #9071 9071 0.5% CAFS, medium expansion, wetting agent, low expansion -15°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
MOUSSEAL®-MR F-30 #2053 2053 ready-to-use solution -30°C
FETTEX® F-25 #2052 2052 ready-to-use solution -25°C
MOUSSEAL®-A F-10 #2047 2047 ready-to-use solution wetting agent, low expansion -10°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
vaPUREx®LV ICAO B 3% F-15 #7345 7345 3% medium expansion, wetting agent, low expansion -10°C
STHAMEX® Performance 1% F-20 #9148 9148 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -20°C
vaPUREx®LV ICAO C 3% F-5 #7371 7371 3% CAFS, network water, low expansion foam -5°C
vaPUREx®LV ICAO B 1% F-5 #7142 7142 1% CAFS, network water, low expansion foam -5°C
vaPUREx®LV ICAO B 3% F-10 #7341 7341 3% CAFS, medium expansion, wetting agent, low expansion -10°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
STHAMEX® Performance 1% F-20 #9148 9148 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -20°C
vaPUREx®- AR 3/3 F-5 #8342 8342 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 3% F-15 #9352 9352 3% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX® Performance 1% F-10 #9147 9147 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -10°C
TRAINING FOAM-N 3% F-0 #9346 9346 3% medium expansion, wetting agent, low expansion 0°C
EXERCISE FOAM-N 1% F-0 #9141 9141 1% medium expansion, wetting agent, low expansion 0°C
vaPUREx®- AR 3/3 F-5 #8343 8343 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® 6% F-15 #9601 9601 6% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX®-class A Classic 1% F-15 #9144 9144 1% CAFS, medium expansion, wetting agent, low expansion -15°C
vaPUREx® LV 0.5% F-10 #7041 7041 0.5% CAFS, medium expansion, wetting agent, low expansion -10°C
STHAMEX® class A 0.5% F-15 #9071 9071 0.5% CAFS, medium expansion, wetting agent, low expansion -15°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
vaPUREx®- AR 3/3 F-5 #8342 8342 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® - MARINE 3% F-20 #9372 9372 3% CAFS, lightweight foam -20°C
STHAMEX® - IAF MARINE 2% F-10 #9271 9271 2% CAFS, lightweight foam -10°C
STHAMEX® FXS IAF 3% F-10 #2355 2355 3% High expansion foam -10°C
STHAMEX® FXS IAF 2% F-10 #2241 2241 2% High expansion foam -10°C
vaPUREx®- AR 3/3 F-5 #8343 8343 3%/3% CAFS, high expansion, medium expansion, wetting agent, low expansion -5°C
STHAMEX® -IAF MARINE 1% F-10 #9146 9146 1% CAFS, lightweight foam -10°C
STHAMEX® -IAF MARINE 2% F-10 #9275 9275 2% CAFS, high expansion foam, low expansion foam -10°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
vaPUREx® FXS AR 3/3 F-0 #2365 2365 3%/3% Low expansion foam 0°C
vaPUREx® FXS PLY 1% F-0 #2150 2150 1% 0°C
STHAMEX® FXS IAF 3% F-10 #2355 2355 3% High expansion foam -10°C
STHAMEX® FXS IAF 2% F-10 #2241 2241 2% High expansion foam -10°C
MOUSSOL®- FF FXS 3/6 F-5 #2941 2941 3%/6% Low expansion foam -5°C
vaPUREx® FXS 3% F-0 #2357 2357 3% Low expansion foam 0°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
TRAINING FOAM-N 3% F-0 #9346 9346 3% medium expansion, wetting agent, low expansion 0°C
EXERCISE FOAM-N 1% F-0 #9141 9141 1% medium expansion, wetting agent, low expansion 0°C
Product Product No. Proportioning Rate Type of foam Frost-resistance
BosQRet® #1801 1801 Retardant
STHAMEX® Performance 1% F-20 #9148 9148 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -20°C
STHAMEX® 3% F-15 #9352 9352 3% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX® Performance 1% F-10 #9147 9147 1% CAFS, high expansion, medium expansion, wetting agent, low expansion -10°C
STHAMEX® 6% F-15 #9601 9601 6% CAFS, high expansion, medium expansion, wetting agent, low expansion -15°C
STHAMEX®-class A Classic 1% F-15 #9144 9144 1% CAFS, medium expansion, wetting agent, low expansion -15°C
STHAMEX® class A 0.5% F-15 #9071 9071 0.5% CAFS, medium expansion, wetting agent, low expansion -15°C

Please contact us

If you have any questions or issues regarding foam agents, please do not hesitate to contact us.

    privacy statement and agree to it

    Info material

    We would like to pass on our knowledge to the users. For this purpose, we prepare technical information on various topics which we make available for download.
    In addition, you will find further information material on our products and product groups here.

    learn more

    Product documentation

    Download the latest versions of our product and safety data sheets. If the product you are looking for is not included, or if another language is needed, please contact us (info@sthamer.com).

    learn more

    FAQ

    Frequently asked questions about our foam agents

    When fighting aircraft fires, it is important to keep the aircraft's hull intact for as long as possible in order to keep the window of time for escaping and rescuing of passengers open for as long as possible too. Therefore, the foam generated with vaPUREx® LV ICAO C 3% F-5 #7371 must not only cover the kerosene pools on the ground quickly and safely, but also be able to be used for cooling the aircraft's fuselage. The foam-water solution produces excellent foam using foam branch pipes or monitor nozzles and the easily flowing foam quickly covers large fuel pools. If the foam jet is directed at the fuselage, a cooling foam blanket is laid on the outer hull. This flows downwards from the top until it drips off and covers any fire pool below or in the immediate vicinity of the aircraft's fuselage. Thanks to the excellent foaming properties, foam heights are achieved that make it possible to safely cover kerosene spills even on rough terrain, away from the runway and quickly reduce the heat impact on the aircraft fuselage. We offer suitable user training courses for airports.
    In the past, airfield firefighting vehicles were designed for the use of low viscosity AFFF. If a change is now made to a foam agent that is produced without the addition of PFAS, this change requires an inspection of the existing system. After specialist cleaning of the vehicle, it is refilled with foam agent. A practical test verifies the proportioning rate and the foam quality produced. Samples of the foam solution should be collected at the most critical operating conditions, i.e. the minimum and maximum flow ranges. Since vaPUREx® ICAO C 3% F-5 #7371 is a water-like, Newtonian foam agent, all commercially available proportioning systems can be used to induce the foam agent to the water stream. The foam generation respectively foam quality produced then depends on the nozzle used. If it is not possible to test the foam quality, we recommend using monitors with foam branch pipes. We have obtained excellent results for numerous turrets with hollow jet nozzles. An effective fire extinguishing foam must have a certain foaming capacity and be easy flowing. vaPUREx® LV ICAO C 3% F-5 #7371 allows universal use with a wide range of turret and nozzle types, combined with maximum extinguishing performance. We offer vehicle inspections as a service. We also accompany conversion projects and conclude them with a “foam training for users”.
    The ICAO directive applies to civil aviation worldwide. In Europe, parallel and complementary EASA guidelines for the safe operation of landing sites and airports are currently being introduced. For fire extinguishing foam agents, the certification standard according to ICAO Annex 14 applies, with an extinguishing performance test according to Levels A, B or C. Level C represents the highest performance requirements. A kerosene fire must be extinguished under test conditions with the lowest application rate within a specified time frame. Level B and Level A allow the application rate to be increased. However, the maximum extinguishing time remains the same. Additional standards are often considered necessary. However, Mil-Spec or other NATO regulations are not a basic requirement for the use of foam agents at civil airports. It is important that the foam agent is extensively tested and confirmed according to ICAO. Our vaPUREx LV ICAO C 3% F-5 #7371 meets the toughest requirements by achieving fire performance level C and enables airport fire services to extinguish fire incidents involving aircraft very quickly.
    The first ban was imposed by EC 2006/122 and prohibited the placing on the market of products with a PFOS content of >50ppm from December 12, 2006 for “placing on the market”. Use was then permitted until June 27, 20011 for those extinguishing agents that had already been placed on the market before the date of entry into force (i.e. in the inventory of fire departments).
    The WHG (Water Resources Act) requires every person within its scope of application to “avoid any detrimental change in the characteristics of water bodies” (WHG §5, Para. (1), 1.). The discharge of substances into bodies of water is generally subject to authorization and is bound by certain regulations. These are set out in various legal ordinances (including the AwSV (Ordinance on Installations for the Handling of Substances Hazardous to Water)). Since the introduction of the WHG, there has been a fundamental duty of care (which also includes the duty to provide active information) for the handling of substances hazardous to water, which includes all foam extinguishing agents and, in particular, extinguishing water.
    magnifiercrossmenu