Industry

In industry, particularly high demands are placed on fire protection and associated equipment due to the risks involved. The foam extinguishing agents used here meet these strict requirements and offer excellent safety margins.

Fluorine-free multi-purpose foam concentrates

comprises our range of synthetic detergent foam concentrates, which are designed for generating low, medium and high-expansion foam. Interface-active ingredients, foam stabilisers and antifreeze characterise the composition of these powerful, reliable and fluorine-free foam concentrates.

STHAMEX®-K 1%
is a highly concentrated synthetic detergent foam concentrate with a 1% induction rate to water. The low induction rate effectively triples the service time when compared with 3% induction rate foam concentrate.

STHAMEX® IAF
is designed for high-expansion inside-air foam systems. These systems generate foam using hot inside-air, loaded with combustion gas from a fire incident. STHAMEX® -IAF is a fluorine-free, synthetic foam concentrate based on a special surfactant combination and stabilisers.

STHAMEX® K-1%
Proportioning rate
Low-expansion foam 1%
Medium-expansion foam 1%
High-expansion foam 1%
Wetting agent 0.1% - 0.5%
Expansion
Low-expansion foam up to 20 times
Medium-expansion foam up to 200 times
High-expansion foam up to 1000 times
25% / 50% drain time
Low-expansion foam up to 15 / 25 minutes
Medium-expansion foam up to 20 / 30 minutes
High-expansion foam up to 15 / 25minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 50 mm2/s
lowest use temp. ≤ 150 mm2/s
STHAMEX® 3%
Proportioning rate
Low-expansion foam 1 %
Medium-expansion foam 1 %
High-expansion foam 2 - 3%
Wetting agent 0.1% - 0.5%
Expansion
Low-expansion foam up to 20 times
Medium-expansion foam up to 200 times
High-expansion foam up to 1000 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Medium-expansion foam up to 10 / 20 minutes
High-expansion foam up to 10 / 25minutes
Frost-resistant -6 °C / -15 °C / -20 °C / -25 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 110 mm2/s
STHAMEX®-IAF 2%
Proportioning rate
High-expansion foam 2%
Expansion
High-expansion foam up to 1000times
25% / 50% drain time
High-expansion foam up to 10 / 25minutes
Frost-resistant -10 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 110 mm2/s

Primary use: Municipal fire services, power stations, industry, plastics industry, recycling plants, maritime, aviation, mining

Main application: non-polar hydrocarbons (fire class B) and solvents, plastics, recyclables, tyres, solid material fires (fire class A).

Installations and equipment: Hollow stram nozzles, low-expansion foam installations, low-expansion foam monitors, low-expansion foam branch pipes, medium-expansion foam branch pipes, high-expansion foam generators, CAFS

All synthetic detergent foam concentrates are fluorine-free, physiologically safe when used as intended, and 100% biodegradable.

Fluorine-free class-A foam concentrates

is a new, refined, highly concentrated foam agent based on foam-forming active ingredients, which are specially designed for extinguishing solid fuel fires (fire class A), as well as for use with compressed air foam system (CAFS). Upwards from 0.1% proportioning rate, STHAMEX® -class A is suitable for use as a wetting agent and, upwards from 0.3%, for CAFS applications. For extinguishing liquid fires (fire class B), the induction rate is 0.5%.

STHAMEX®-class A
Proportioning rate
Class A fires from 0.3%
Class B fires 0.5%
Wetting agent 0.1% - 0.3%
Expansion
Low-expansion foam up to 20times
Medium-expansion foam up to 200times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Medium-expansion foam up to 10 / 20 minutes
Frost-resistant - 15 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 50 mm2/s
lowest use temp. ≤ 150 mm2/s
STHAMEX® - class A Classic
Proportioning rate
Class A fires from 0.5%
Class B fires 1%
Wetting agent 0.1% - 0.3%
Expansion
Low-expansion foam up to 20times
Medium-expansion foam up to 200times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Medium-expansion foam up to 10 / 20 minutes
Frost-resistant - 15 °C
Viscosity
20 °C ≤ 50 mm2/s
0 °C ≤ 20 mm2/s
lowest use temp. ≤ 150 mm2/s

Primary use: Municipal fire brigades, industry, recycling industry, waste treatment plants

Main application: Solid material fires, wildfires, non-polar hydrocarbons and solvents, plastics, recyclables

Installations and equipment: CAFS, Hollow stream nozzles, medium-expansion foam branchpipes, low-expansion foam branchpipes, foam / water monitors, foam / water branchpipes

All class-A foam concentrates are fluorine-free, physiologically safe when used as intended, and readily 100% biodegradable.

Aqueous film-forming foam concentrates (AFFF)

comprises a range of synthetic, aqueous film-forming foam (AFFF) concentrates, which are designed for very fast and lasting fire extinguishing results with high burn-back resistance. These advantages are apparent particularly when extinguishing large-scale liquid fires. AFFF foams form a self-sealing duplex aqueous film on non-polar hydrocarbons, which also allows for application in non-aspirated form.

STHAMEX® - AFFF 0,5%
Proportioning rate
non-polar 0.5%
Expansion
Low-expansion foam up to 15times
Medium-expansion foam up to 100times
25% / 50% drain time
Low-expansion foam up to 5 / 8 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant - 15 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 40 mm2/s
lowest use temp. ≤ 120 mm2/s
STHAMEX® - AFFF 1%
Proportioning rate
non-polar 1%
Expansion
Low-expansion foam up to 15times
Medium-expansion foam up to 100times
25% / 50% drain time
Low-expansion foam up to 5 / 8 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant 0 °C / - 15 °C / - 25 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 40 mm2/s
lowest use temp. ≤ 120 mm2/s
STHAMEX® - AFFF 3%
Proportioning rate
non-polar 3%
Expansion
Low-expansion foam up to 15times
Medium-expansion foam up to 100times
25% / 50% drain time
Low-expansion foam up to 5 / 8 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant 0 °C / - 15 °C / - 25 °C
Viscosity
20 °C ≤ 10 mm2/s
0 °C ≤ 20 mm2/s
lowest use temp. ≤ 30 mm2/s
STHAMEX® - AFFF 6%
Proportioning rate
non-polar 6%
Expansion
Low-expansion foam up to 15times
Medium-expansion foam up to 100times
25% / 50% drain time
Low-expansion foam up to 5 / 8 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant 0 °C / - 15 °C
Viscosity
20 °C ≤ 10 mm2/s
0 °C ≤ 20 mm2/s
lowest use temp. ≤ 30 mm2/s

Primary use: Chemical industry, petroleum and petrochemical industry, aviation, maritime, plastics industry, recycling industry, mining

Main application: Non-polar hydrocarbon and solvent fires, solid material fires, plastics, recyclables

Installations and equipment: Low-expansion foam installations, sub-surface installations, foam / water monitors, foam / water nozzles, medium-expansion foam branchpipes, low-expansion foam branchpipes, foam / water sprinkler or deluge systems, CAFS.

STHAMEX® -AFFF foam concentrates are physiologically safe and 100% biodegradable when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

are aqueous film-forming foam concentrates with exceptional fire performance and extremely high burn-back resistance.

STHAMEX® - AFFF PREMIUM 1%
Proportioning rate
Low-expansion foam 1%
Expansion
Low-expansion foam 5 - 10times
25% / 50% drain time
Low-expansion foam up to 3 / 8 minutes
Frost-resistant -25 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 40 mm2/s
lowest use temp. ≤ 230 mm2/s
STHAMEX® - AFFF PREMIUM 3%
Proportioning rate
Low-expansion foam 3%
Expansion
Low-expansion foam 5 - 10times
25% / 50% drain time
Low-expansion foam up to 3 / 8 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 5 mm2/s
0 °C ≤ 10 mm2/s
lowest use temp. ≤ 20 mm2/s
Approvals
EN 1568-3, ICAO, UL/ULC, LASTfire

Primary use: Chemical industry, petroleum and petrochemical industry, aviation, maritime, plastics industry, recycling industry

Main application: Non-polar hydrocarbon and solvent fires, solid material fires, plastics, recyclables

Installations and equipment: Low-expansion foam installations, sub-surface installations, foam / water monitors, foam / water nozzles, medium-expansion foam branchpipes, low-expansion foam branchpipes, foam / water sprinkler or deluge systems, CAFS.

STHAMEX®-AFFF PREMIUM foam concentrates are physiologically safe and 100% biodegradable when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

Fluorine-free alcohol-resistant foam concentrate

is a fluorine-free, alcohol-resistant synthetic foam concentrate for generating low, medium and high-expansion foam for use on both polar and non-polar liquid hydrocarbons (fire class B), as well as
ember forming solids (fire class A).

MOUSSOL® FF 3/6
Proportioning rate
non-polar 3%
polar 3 - 6%
Wetting agent 0.3% - 0.5%
Expansion
Low-expansion foam up to 10 times
Medium-expansion foam up to 100 times
High-expansion foam up to 800 times
25% / 50% drain time
Low-expansion foam up to 8 / 15 minutes
Medium-expansion foam up to 5 / 10 minutes
High-expansion foam up to 4 / 6minutes
Frost-resistant -5 °C / -15 °C
Viscosity pseudoplastic, pump assisted proportioning may be required
Approvals
EN 1568 Teil 1-4, ICAO, LASTfire

Primary use: Municipal fire services, power stations, industry, plastics industry, recycling plants, maritime, aviation

Main application: Polar and non-polar foam-destroying hydrocarbons and solvents (fire class B), plastics, recyclables.

Installations and equipment: Hollow stram nozzles, low-expansion foam installations, low-expansion foam monitors, low-expansion foam branch pipes, medium-expansion foam branch pipes, high-expansion foam generators, CAFS

MOUSSOL©-FF foam concentrates are fluorine-free, physiologically safe when used as
intended, and 100% biodegradable.

Alcohol-resistant and aqueous film-forming concentrates

comprises a range of synthetic, alcohol-resistant, polymer and aqueous film-forming (AFFF) foam concentrates which are designed for safe, lasting extinguishing results and high burn-back resistance on polar solvents, non polar foam-destroying hydrocarbons and petroleum products.

MOUSSOL®-APS 1/3
Proportioning rate
non-polar 1%
polar 3%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Medium-expansion foam up to 7 / 10 minutes
Frost-resistant 0 °C / -15 °C
Viscosity pseudoplastic, pump assisted proportioning may be required
MOUSSOL®-APS 3/3
Proportioning rate
non-polar 3%
polar 3%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Medium-expansion foam up to 7 / 10 minutes
Frost-resistant 0 °C / -10 °C / -15 °C
Viscosity pseudoplastic, pump assisted proportioning may be required
MOUSSOL®-APS 3/6
Proportioning rate
non-polar 3%
polar 6%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Medium-expansion foam up to 7 / 10 minutes
Frost-resistant 0 °C / -15 °C
Viscosity pseudoplastic, pump assisted proportioning may be required
MOUSSOL®-APS 6/6
Proportioning rate
non-polar 6%
polar 6%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Medium-expansion foam up to 7 / 10 minutes
Frost-resistant -10 °C
Viscosity pseudoplastic, pump assisted proportioning may be required

Primary use: Chemical industry, petroleum and petrochemical industry, aviation, maritime, plastics industry, recycling industry

Main application: Polar and non-polar foam-destroying hydrocarbons and solvents (fire class B), plastics, recyclables.

Installations and equipment: Hollow stream nozzles, low and medium-expansion foam installations, foam / water monitors, foam / water branchpipes, medium-expansion foam branchpipes, low-expansion foam branchpipes, foam / water sprinkler systems, CAFS

MOUSSOL® -APS foam concentrates are physiologically safe when used as intended, and 100% biodegradable, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

are alcohol-resistant, polymer and aqueous-film forming AFFF foam concentrates with excellent fire performance and high burn-back resistance on polar and non-polar foam-destroying solvents and petrochemical hydrocarbons.

MOUSSOL®-APS 1/3 PREMIUM
Proportioning rate
non-polar 1%
polar 3%
Expansion
Low-expansion foam 5 - 10 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Frost-resistant 0 °C
Viscosity pseudoplastic, pump assisted proportioning may be required
MOUSSOL®-APS 3/3 PREMIUM
Proportioning rate
non-polar 3%
polar 3%
Expansion
Low-expansion foam 5 - 10 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Frost-resistant -15 °C
Viscosity pseudoplastic, pump assisted proportioning may be required
MOUSSOL®-APS 3/6 PREMIUM
Proportioning rate
non-polar 3%
polar 5 - 6%
Expansion
Low-expansion foam 5 - 10 times
25% / 50% drain time
Low-expansion foam up to 10 / 15 minutes
Frost-resistant -15 °C
Viscosity pseudoplastic, pump assisted proportioning may be required

Primary use: Chemical industry, petroleum and petrochemical industry, aviation, maritime, plastics industry, recycling indusChemische Industrie, Mineralöl- und petrochemische Industrie, Flughäfen, Schifffahrt, Kunststoffindustrie, Recyclingindustrie

Main application: Polar and non-polar foam-destroying hydrocarbons and solvents (fire class B), plastics, recyclables.

Installations and equipment: Hollow stream nozzles, low and medium-expansion foam installations, foam / water monitors, foam / water branchpipes, medium-expansion foam branchpipes, low-expansion foam branchpipes, foam / water sprinkler systems, CAFS

MOUSSOL®-APS PREMIUM foam concentrates are physiologically safe when used as intended, and 100% biodegradable, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

comprises a product range of low-viscosity, alcohol-resistant, aqueous film-forming AFFF foam concentrates without polymer additives, which have a viscosity equivalent to that of a Newtonian fluid. Thanks to the low viscosity, these products may be used without adverse effects at the lowest nominal
operating temperature in all commercially available proportioning systems. Storage and the logistical effort at the scene of a fire are minimised by the highly concentrated options, which have proportioning rates as low as 0.5% and 1%. They are excellent supplements for existing foam concepts of municipal
fire services facing increased risk of large liquid fires in their response area.

MOUSSOL®-APS LV 0.5/0.5
Proportioning rate
non-polar 0.5%
polar 0.5%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 5 / 10 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant -10 °C
Viscosity
20 °C ≤ 50 mm2/s
0 °C ≤ 200 mm2/s
lowest use temp. ≤ 900 mm2/s
MOUSSOL®-APS LV 1/1
Proportioning rate
non-polar 1%
polar 1%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 5 / 10 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant -25 °C
Viscosity
20 °C ≤ 50 mm2/s
0 °C ≤ 150 mm2/s
lowest use temp. ≤ 900 mm2/s
MOUSSOL®-APS LV 1/3
Proportioning rate
non-polar 1%
polar 3%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 5 / 10 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 50 mm2/s
MOUSSOL®-APS LV 3/3
Proportioning rate
non-polar 3%
polar 3%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 5 / 10 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 50 mm2/s

Primary use: Chemical industry, petroleum and petrochemical industry, aviation, maritime, plastics industry, recycling industry, tank storage facilities.

Main application: Polar and non-polar foam-destroying hydrocarbons and solvents (fire class B), plastics, recyclables.

Installations and equipment: Hollow stream nozzles, low and medium-expansion foam installations, foam / water monitors, foam / water branchpipes, medium-expansion foam branchpipes, low-expansion foam branchpipes, foam / water sprinkler systems, CAFS

MOUSSOL®-APS LV foam concentrates are physiologically safe and readily biodegradable
when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

are low-viscosity, alcohol-resistant, aqueous film-forming foam concentrates with excellent fire performance and comparatively high burn-back resistance on polar and non-polar foam-destroying hydrocarbons. Even at low temperatures these products are suitable for mobile and stationary application with conventional venturi proportioners.

MOUSSOL®-APS LV 1/1 PREMIUM
Proportioning rate
non-polar 1%
polar 1%
Expansion
Low-expansion foam 5 - 10 times
25% / 50% drain time
Low-expansion foam up to 5 / 10 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 30 mm2/s
0 °C ≤ 70 mm2/s
lowest use temp. ≤ 220 mm2/s
MOUSSOL®-APS LV 1/3 PREMIUM
Proportioning rate
non-polar 1%
polar 3%
Expansion
Low-expansion foam 5 - 10 times
25% / 50% drain time
Low-expansion foam up to 5 / 10 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 50 mm2/s
MOUSSOL®-APS LV 3/3
Proportioning rate
non-polar 3%
polar 3%
Expansion
Low-expansion foam up to 15 times
Medium-expansion foam up to 100 times
25% / 50% drain time
Low-expansion foam up to 5 / 10 minutes
Medium-expansion foam up to 4 / 6 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 20 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 50 mm2/s

Primary use: Chemical industry, petroleum and petrochemical industry, aviation, maritime, plastics industry, recycling industry

Main application: Polar and non-polar foam-destroying hydrocarbons and solvents (fire class B), plastics, recyclables.

Installations and equipment: Hollow stream nozzles, low and medium-expansion foam installations, foam / water monitors, foam / water branchpipes, medium-expansion foam branchpipes, low-expansion foam branchpipes, foam / water sprinkler systems, CAFS

MOUSSOL®-APS LV Premium foam concentrates are physiologically safe when used as intended, and 100% biodegradable, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

Protein-based low-expansion foam concentrates

comprises a product range of protein-based low-expansion foam concentrates, which are based on organic, renewable proteins, foam stabilisers and antifreeze and which constitute the origin of air-foam firefighting. A dense foam structure and particularly good foam stability characterise these reliable, fluorine-free foam concentrates.

FOAMOUSSE® 3%
Proportioning rate
Low-expansion foam 3%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 10 / 12 minutes
Frost-resistant -15 °C / -25 °C
Viscosity
20 °C ≤ 25 mm2/s
0 °C ≤ 40 mm2/s
lowest use temp. ≤ 100 mm2/s
FOAMOUSSE® 6%
Proportioning rate
Low-expansion foam 6%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 10 / 12 minutes
Frost-resistant -15 °C / -25 °C
Viscosity
20 °C ≤ 25 mm2/s
0 °C ≤ 40 mm2/s
lowest use temp. ≤ 100 mm2/s

Primary use: Petroleum and petrochemical industry, tank storage facilities.

Main application: Non-polar hydrocarbon fires

Installations and equipment: Low-expansion foam installations, low-expansion foam branchpipes, foam monitors.

FOAMOUSSE® foam concentrates are fluorine-free, physiologically safe when used as intended, and readily biodegradable.

Fluor Protein- & Aqueous Film-forming Protein Foam Concentrates

are protein-based low-expansion foam concentrates combined with C6 fluorinated additives. The fluorinated components cause the foam to be oil-repellent (oleophobic), meaning the foam does not mix with the fuel, and increase flowability and fire performance significantly.

FLUOR-FOAMOUSSE® 3%
Proportioning rate
Low-expansion foam 3%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 8 / 12 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 30 mm2/s
0 °C ≤ 60 mm2/s
lowest use temp. ≤ 120 mm2/s
FLUOR-FOAMOUSSE® 6%
Proportioning rate
Low-expansion foam 6%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 8 / 12 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 30 mm2/s
0 °C ≤ 60 mm2/s
lowest use temp. ≤ 120 mm2/s

Primary use: Chemical and petrochemical industry, refineries, aviation, maritime, tank storage facilities

Main application: non-polar hydrocarbon fires, hydrocarbons with small proportions of polar solvents.

Installations and equipment: Low-expansion foam installations, sub-surface installations, foam / water monitors, low-expansion foam branchpipes

FLUOR-FOAMOUSSE® are physiologically safe when used as intended, and readily biodegradable, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

are aqueous film-forming, protein-based low-expansion foam concentrates combined with AFFF fluorinated components which form a duplex aqueous film which, in turn, leads to significantly increased fire performance and burn-back resistance.

FOAMOUSSE®-FFFP 3%
Proportioning rate
Low-expansion foam 3%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 6 / 10 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 15 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 40 mm2/s
FOAMOUSSE®,-FFFP 6%
Proportioning rate
Low-expansion foam 6%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 6 / 10 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 15 mm2/s
0 °C ≤ 30 mm2/s
lowest use temp. ≤ 40 mm2/s

Primary use: Chemical and petrochemical industry, refineries, aviation, maritime, tank storage facilities

Main application: non-polar hydrocarbon fires, hydrocarbons with small proportions of polar solvents.

Installations and equipment: Low-expansion foam installations, sub-surface installations, foam / water monitors, low-expansion foam branchpipes

FOAMOUSSE® -FFFP foam concentrates are physiologically safe when used as intended, and readily biodegradable, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

Alcohol-resistant Protein Foam Concentrates

is a fluoroprotein low-expansion foam concentrate combined with polymers which, when applied indirectly, build a homogenous polymer layer between the foam-destroying effect of the polar chemical and the foam above.

FOAMOUSSE®-FP/AR 3/6
Proportioning rate
non-polar 3%
polar 6%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 8 / 15 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 40 mm2/s
0 °C ≤ 80 mm2/s
lowest use temp. ≤ 160 mm2/s

Primary use: Chemical industry, pharmaceutical industry, petroleum and petrochemical industry, aviation, maritime.

Main application: Foam-destroying polar and non-polar hydrocarbons

Installations and equipment: Low-expansion foam installations, foam/water monitors, low-expansion foam branchpipes, semi-sub-surface installations

FOAMOUSSE®-FP / AR foam concentrates are physiologically safe and readily biodegradable when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

is an alcohol-resistant, polymer and aqueous film-forming, protein-based low-expansion foam concentrate. It consists of organic proteins combined with polymer film-formers, antifreeze and AFFF fluorinated components.

FOAMOUSSE®-FFFP/AR 3/6
Proportioning rate
non-polar 3%
polar 6%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 8 / 12 minutes
Frost-resistant -15 °C
Viscosity pseudoplastic, pump assisted proportioning may be required

Primary use: Chemical industry, pharmaceutical industry, petroleum and petrochemical industry, aviation, maritime.

Main application: Foam-destroying polar and non-polar hydrocarbons

Installations and equipment: Low-expansion foam installations, foam/water monitors, low-expansion foam branchpipes, semi-sub-surface installations

FOAMOUSSE® -FFFP/AR foam concentrates are physiologically safe and readily biodegradable when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

is an alcohol-resistant, low-viscosity, aqueous film-forming, protein-based low-expansion foam concentrate. It consists of organic proteins combined with alcohol-resistant fluorinated components, stabilisers and antifreeze.

FOAMOUSSE®-OMEGA 3/3
Proportioning rate
non-polar 3%
polar 3%
Expansion
Low-expansion foam up to 8 times
25% / 50% drain time
Low-expansion foam up to 5 / 8 minutes
Frost-resistant -15 °C
Viscosity
20 °C ≤ 40 mm2/s
0 °C ≤ 80 mm2/s
lowest use temp. ≤ 160 mm2/s

Primary use: Chemical industry, pharmaceutical industry, petroleum and petrochemical industry, aviation, maritime.

Main application: Foam-destroying polar and non-polar hydrocarbons

Installations and equipment: Low-expansion foam installations, foam/water monitors, low-expansion foam branchpipes, semi-sub-surface installations

SCHAUMGEIST®-OMEGA foam concentrates are physiologically safe and readily biodegradable when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

Wetting Agent

is a wetting agent based on synthetic, surface active components. Used as fire water additive the wetting effect of UltraWet® is considerably higher than conventional foam concentrates at the same concentration. The UltraWet® solution penetrates the surface of materials which are difficult to wet quickly and thoroughly. The use concentration of only 0.1% reduces the environmental impact and allows for a rapid and complete bio degradation.

UltraWet®
Proportioning rate
Wetting agent from 0.1%
Frost-resistant -25 °C
Viscosity
20 °C ≤ 25 mm2/s
0 °C ≤ 50 mm2/s
lowest use temp. ≤ 200 mm2/s

Primary use: Municipal fire services, wood/paper industry, recycling industry

Main application: Ember forming materials (fire class A), wildfires

Installations and equipment: Hollow spray nozzles, jet pipes, spray nozzles, water sprinkler or deluge systems, water monitors

UltraWet® is fluorine-free, physiologically harmless and fully biodegradable.